The Mini Series of the Timber Tamer turns your mini-excavator into a versatile bushhog, allowing you to go where your tractor pulled bushhog can’t. It's perfect for use in maintaining right of ways, cutting overhanging limbs, as well as mowing ditch banks and wet areas.

Model Sizes
Mini 48 - 4 foot cutting path
Mini 60 - 5 foot cutting path
Mini 72 - 6 foot cutting path

General Specifications
cuts brush, saplings and debris up to 3 inches in diameter at ground level
adjustable cutting angle with existing boom controls
clockwise and counter clockwise cutter rotation
two free swinging, double-edged blades
high strength housing construction
safety chain assemblies to contain discharge
weight: 1,500 pounds


Hydraulic Specifications
continuous service priority flow required
three position directional control valve with open center spool
a flow divider valve is needed in certain applications
minimum of a constant 12 g.p.m. @ 2000 p.s.i., regardless of excavator function
maximum of 25 g.p.m. @ 2500 p.s.i.
we recommend all valves and plumbing be installed by your excavator dealer. plumbing from the stick to the cutter is required. the mini 48 is plumbed out to 2 #10 male jic fittings. the completed hydraulic installation is to be consistent with common industry standards.


Electrical Specifications
20 amp auxiliary circuit for 12 or 24 volt for pilot valve operation
cab mounted, foot-operated master "on/off" switch with indicator light (optional)

Contact us to receive a Mini Series Timber Tamer demonstration video.

main page timber tamer thumbs rakes grapples buckets forestry dirt devil custom-misc contact us